Loading…

ZZ Plant Propagation: Division and Leaf Cuttings

Want more plants for free? A ZZ plant will give them, and almost never fails. It just asks for patience. ZZ plant propagation is easy and very slow. The plant grows from thick underground rhizomes that store water, and a new plant has to build one of those before it does anything you can see. University of Illinois Extension sums up the choice: division is the fastest way to more ZZ plants, and leaf cuttings take longer but give many more of them.

Quick answer: for one or two plants now, divide the root mass so each piece has rhizomes, roots and a stalk. For many plants, cut leaflets off with their small stalk, let them dry a few days, and set them about 1 cm deep in moist mix or in shallow water, in bright indirect light and warmth. Expect months: roots first, then a small rhizome, then a new stalk.

Division: the Fast Way

Following University of Illinois Extension’s steps: take the plant out of its pot and gently loosen the soil until you can see the rhizomes, the potato-like lumps at the base of the stalks. Choose a healthy section with at least one stalk and separate it by hand, or with a clean, sharp knife where it will not pull apart. Keep plenty of roots on each piece. Pot it in a well-draining mix, water lightly, and give it bright, indirect light while it settles. It is the right time to do it when the rhizomes are pressing against the pot, as they often do.

Leaf Cuttings: Many Plants

1. Take a stalkCut a healthy stalk off at the base with clean snips. University of Illinois Extension reports a study in which leaflets from the top of the stalk made the most new rhizomes, so use the upper ones first.
2. Cut the leaflets offCut each leaflet from the stalk with its own short leaf stalk intact.
3. Let them callusLeave them a few days until the cut ends are dry. University of Illinois Extension says this lowers the risk of rot.
4. Soil or waterPush each leaflet about 1 cm into clean, moist potting mix, or stand it in a shallow container of water. Bright, indirect light.
5. Keep it warm and waitUniversity of Illinois Extension suggests air near 27 °C (80 °F) and fairly high humidity, and watching the cuttings over the following few months. Roots come first, then a small rhizome at the base. Move water cuttings to soil once both have formed.

Do not use a bare stem. The same study found that a stem cutting without an attached leaf did not callus or root. A whole stalk with its leaflets can be rooted in water, but the leaflets are the part doing the work.

Watch our short video

ZZ Plant Propagation: Division and Leaf Cuttings

When to Propagate in Canada

Spring and summer. Division can be done whenever the plant needs repotting, but leaf cuttings depend on warmth, and University of Illinois Extension’s figure of about 27 °C is well above a Canadian living room in winter, never mind a windowsill at night. On the shortest day, Toronto gets 8h55 of daylight and Edmonton 7h27, worked out from each city’s latitude. Winter cuttings are not wasted, only slower; warmth under the pot is the single biggest help.

Recommended
Seedling Heat Mat

University of Illinois Extension suggests keeping ZZ leaf cuttings near 27 °C. A seedling heat mat under a tray of cuttings warms the mix well above a Canadian room in winter, which is where most of the delay comes from. Use it under pots of mix, not under glasses of water.

Check price on Amazon.ca →

Affiliate link — GrowersGuide.ca may earn a commission on qualifying purchases, at no extra cost to you. See our affiliate disclosure.

What Goes Wrong

The cutting turns yellow and softRot from wet mix. ZZ cuttings want the mix moist, not wet; let it dry slightly between waterings, and make sure the ends were dry before planting.
Nothing for weeksNormal. A firm green leaflet is alive and working underground. Leave it.
A division wiltsIt lost roots in the split. The rhizome holds water, so it usually recovers; water lightly and keep it out of direct sun.

Pets and ZZ plants

Neither the ASPCA plant database nor Pet Poison Helpline has an entry for ZZ plant. ZZ belongs to the arum family, and Pet Poison Helpline says plants with insoluble oxalate crystals, which irritate the mouth when chewed, are often in that family. With no listing either way, treat it as a plant pets should not chew. If a pet eats part of a plant, call your vet, ASPCA Animal Poison Control or Pet Poison Helpline.

Frequently Asked Questions

How do you propagate a ZZ plant?

University of Illinois Extension describes two ways. Division is the most common and fastest: split the root mass so each piece has rhizomes, roots and at least one stalk. Leaf cuttings take longer but give many more plants: cut leaflets off with their small stalk, let them dry a few days, and set them in moist mix or shallow water.

How long does a ZZ plant leaf cutting take?

Months. University of Illinois Extension says to monitor the cuttings over the following few months: roots come first, then a small rhizome forms at the base, and only after that does a new stalk appear. In a cool Canadian house in winter it takes longer still.

Can you propagate a ZZ plant in water?

Yes. University of Illinois Extension lists a shallow container of water as an option for leaf cuttings. Keep the water fresh and move the cutting to soil once roots and a small rhizome have formed.

Can you propagate a ZZ plant from a stem without leaves?

No. University of Illinois Extension cites a study that found a stem cutting without an attached leaf did not callus or root. Use leaflets, or a stalk with its leaves.

Which ZZ leaves root best?

The same study, as reported by University of Illinois Extension, found that leaf cuttings from the top of a stalk produced the most new rhizomes. Take your leaflets from the upper part of a healthy stalk.

Is ZZ plant toxic to cats and dogs?

Neither the ASPCA nor Pet Poison Helpline has an entry for ZZ plant. It belongs to the arum family, which Pet Poison Helpline says often contains insoluble oxalate crystals that irritate the mouth. With no listing either way, treat it as a plant pets should not chew.

For care once the new plants are growing, see ZZ plant care in Canada. Choosing between the two toughest houseplants? See snake plant vs ZZ plant.

More Houseplant Propagation Guides

Spider Plant Propagation → Babies in water or soil, and division Snake Plant Propagation → Division, rhizomes and leaf cuttings Pothos Propagation → Node cuttings in water or soil Monstera Propagation → Node cuttings and air layering Fiddle Leaf Fig Propagation → Stem cuttings and air layering Jade Plant Propagation → Stem and leaf cuttings, dried first Prayer Plant Propagation → Division and stem cuttings in water Peperomia Propagation → Leaf and stem cuttings, and division String of Hearts Propagation → Tubers and vine cuttings, in soil or water Peace Lily Propagation → Division of the crowns, in spring Aloe Vera Propagation → Pups, and why leaves rarely work String of Pearls Propagation → Strands laid on soil, or in water Rubber Plant Propagation → Tip cuttings and air layering Hoya Propagation → Stem cuttings with a node, in water, moss or mix Dieffenbachia Propagation → Tip and cane cuttings, and air layering Umbrella Plant Propagation → Stem cuttings and air layering

Was this guide helpful?

Tap or press a star to rate

🌱 Free Newsletter

Get New Guides Before Anyone Else

Planting reminders for your city, new calculators, and Canadian growing guides — free, no spam.

Suggest what we write next →

⭐ Most Popular

Weather data by Open-Meteo.com (CC BY 4.0) · © OpenStreetMap contributors

As an Amazon Associate, GrowersGuide.ca earns from qualifying purchases. See our affiliate disclosure.