Loading…

Propagating Snake Plant in Water or Soil

Want more plants for free? A snake plant gives them easily. The only real worry is time, and that part we can tell you honestly.

Propagating snake plant in water is the method most people want to try, because you can watch the roots grow in the glass. It works, slowly, and the steps are below. Snake plant propagation as a whole comes down to one choice: divide the plant, which is quick and keeps its pattern, or grow new plants from pieces of leaf, which is slow and changes the pattern on yellow-edged types. Both work. Which one you want depends on how many new plants you need and how long you can wait.

Quick answer: for a quick plant that looks like its parent, divide the clump or cut off a pup with its own rhizome. For many plants from one leaf, cut it into 5–8 cm sections, let the ends dry a day or two, and root them bottom end down in water or barely moist mix. Expect months, not weeks, and expect yellow edges to disappear on leaf cuttings.

Which Method?

MethodHow fastKeeps the leaf pattern?
DivisionA rooted plant the same dayYes
Pup with rhizomeA rooted plant the same dayYes
Leaf cuttings in waterRoots in weeks, a shoot in monthsUsually not on yellow-edged types
Leaf cuttings in soilThe same, without the move from waterUsually not on yellow-edged types

Division and Pups

A snake plant spreads by underground stems called rhizomes, and each new fan of leaves that comes up beside the main clump is a pup. Ease the plant out of its pot and brush off enough soil to see where the rhizomes join. Cut through a rhizome with a clean knife so each piece has leaves and its own roots. A pup with only a few roots can still be cut off; let the cut dry for a day before potting.

Pot each piece in a free-draining mix, such as cactus mix or potting mix with extra perlite, at the depth it grew before. Water once, then let it dry well before watering again: a fresh division has cut roots, and wet soil is what rots them.

Propagating Snake Plant in Water

Worried your cuttings will just turn to mush in the glass? Most failures come from two things, an end that went in wet and water that was left to go stale, and both are easy to avoid.

  1. Cut a healthy leaf off at the base and slice it across into sections about 5–8 cm long. Mark the bottom of each piece with a small notch or a pen line as you go: only the end that was nearer the base will root.
  2. Let the cut ends dry for a day or two on a dry surface, until they feel dry to the touch. This is the step that most often prevents rot.
  3. Stand each piece bottom end down in a jar with just 2–3 cm of room-temperature water. Only the bottom needs to be wet; a leaf sunk deep in water rots faster.
  4. Change the water every few days, and rinse the jar if it turns cloudy. Keep the jar somewhere warm with bright, indirect light.
  5. Wait for roots, then a shoot. Roots usually show after several weeks; a new shoot takes longer, and in a cool Canadian winter it can take months. Iowa State University Extension gives about two months for a shoot from a leaf section in a rooting medium, and water is no faster.
  6. Move it to soil once the roots are a few centimetres long. Pot it in barely moist cactus mix and water lightly until it settles. Water roots are weaker than roots grown in soil, so the first weeks after the move are the delicate part.

If a piece goes soft: take it out, cut above the soft part, let the new end dry again and start over in fresh water. If the edges were yellow: expect a plain green plant, the same as with soil cuttings (explained below).

Water or soil? Water lets you see what is happening, which is reassuring the first time. Soil skips the move from water and the weaker water roots. Both work; if you have several sections, try a few of each. Other plants that do well in a glass are compared in water or soil: which to root cuttings in.

Leaf Cuttings, Step by Step

1. Cut and markTake a healthy leaf off at the base and cut it across into 5–8 cm sections. Mark which end is which as you go: a section only roots from the end that was nearer the base, and Iowa State University Extension cuts a small notch in the top end so none goes in upside down.
2. Let the ends dryLeave the pieces on a dry surface for a day or two until the cut ends feel dry. A dry end rots far less often.
3. Water or soilIn water, stand each piece bottom down in a few centimetres and change the water every few days. In soil, push each piece 2.5–5 cm into barely moist perlite or cactus mix, the depth Iowa State University Extension gives, and water lightly only when the mix is nearly dry.
4. WaitRoots come first; Iowa State University Extension says a new shoot should appear at the base in about two months, and longer in a cool, dim winter. Move water cuttings to soil once they have a few centimetres of roots, because water roots are weaker than soil roots.

Why the yellow edges vanish: on yellow-edged types such as ‘Laurentii’, a leaf cutting usually grows into a plain green plant, because the yellow edge does not carry into the new shoot. Iowa State University Extension says most variegated snake plants do not come true from leaf sections. If the pattern is the reason you love the plant, divide it instead.

When to Propagate in Canada

Spring and early summer, when the plant is growing and the days are long. Division can be done any time the plant needs repotting, but leaf cuttings taken in a Canadian winter sit for a long time doing little. On the shortest day, Toronto gets 8h55 of daylight and Edmonton 7h27, worked out from each city’s latitude. A snake plant cutting needs warmth and light to make a shoot, and a cold windowsill in January offers neither.

What Goes Wrong

The cutting turns soft and mushyRot, from wet soil or stale water. Cut above the soft part, let it dry again, and use less water. In soil, the mix should be barely moist, never wet.
No roots at allOften a piece planted upside down, or a cold spot. Check your marks, and move the cuttings somewhere warm and bright.
Roots but no shoot for monthsNormal, especially in winter. As long as the leaf piece is firm and the roots look healthy, leave it alone.

Pets and snake plants

The ASPCA lists snake plant as toxic to dogs and cats. The toxic principle is saponins, and the signs it lists are nausea, vomiting and diarrhea. Keep it where pets cannot chew the leaves, and keep cut leaves from propagation out of reach too. If a pet eats part of a plant, call your vet, ASPCA Animal Poison Control or Pet Poison Helpline.

Recommended
3-in-1 Soil Moisture, Light and pH Meter

Push the probe into the soil to see whether it is still moist at root depth, the most common reason plants struggle. It also gives a rough light and pH reading.

Check price on Amazon.ca →

Affiliate link — GrowersGuide.ca may earn a commission on qualifying purchases, at no extra cost to you. See our affiliate disclosure.

Frequently Asked Questions

What is the best way to propagate a snake plant?

Division. Splitting the clump, or cutting off a pup with its own piece of rhizome, gives you a rooted plant straight away and keeps the parent's leaf pattern exactly. Leaf cuttings also work, but they take months and usually lose a yellow edge.

Can you propagate a snake plant in water?

Yes. Cut a leaf into sections about 5 to 8 cm long, let the cut ends dry for a day or two, and stand each section bottom end down in a few centimetres of water. Change the water every few days. Roots follow in several weeks and a new shoot takes longer. Move it to soil once there are a few centimetres of roots, because water roots are weaker than soil roots.

Why did my snake plant cutting lose its yellow edges?

A leaf cutting of a yellow-edged snake plant usually grows into a plain green plant. The yellow edge is not carried into the new shoot that forms at the base of a leaf piece. To keep the pattern, propagate by division or by a pup with its own rhizome.

How long does a snake plant cutting take to grow?

Months. Iowa State University Extension says new shoots should appear at the base of a leaf section in about two months, and in a Canadian winter, when the days are short, it is often longer. Division skips the wait.

Does it matter which way up a snake plant leaf cutting goes?

Yes. A section only roots from the end that was nearer the base of the leaf. Mark the bottom of each piece as you cut it, with a small notch or a pen line, so none goes in upside down.

Is snake plant toxic to cats and dogs?

The ASPCA lists snake plant as toxic to dogs and cats. It contains saponins, and the signs listed are nausea, vomiting and diarrhea. Keep the plant and any cut leaf pieces out of reach.

Once the new plants are growing, see snake plant care in Canada, and how to shape a snake plant. Other easy candidates are ranked in the easiest houseplants to propagate.

More Houseplant Propagation Guides

Spider Plant Propagation → Babies in water or soil, and division Pothos Propagation → Node cuttings in water or soil Monstera Propagation → Node cuttings and air layering Fiddle Leaf Fig Propagation → Stem cuttings and air layering Jade Plant Propagation → Stem and leaf cuttings, dried first ZZ Plant Propagation → Division and slow leaf cuttings Prayer Plant Propagation → Division and stem cuttings in water Peperomia Propagation → Leaf and stem cuttings, and division String of Hearts Propagation → Tubers and vine cuttings, in soil or water Peace Lily Propagation → Division of the crowns, in spring Aloe Vera Propagation → Pups, and why leaves rarely work String of Pearls Propagation → Strands laid on soil, or in water Rubber Plant Propagation → Tip cuttings and air layering Hoya Propagation → Stem cuttings with a node, in water, moss or mix Dieffenbachia Propagation → Tip and cane cuttings, and air layering Umbrella Plant Propagation → Stem cuttings and air layering

Was this guide helpful?

Tap or press a star to rate

🌱 Free Newsletter

Get New Guides Before Anyone Else

Planting reminders for your city, new calculators, and Canadian growing guides — free, no spam.

Suggest what we write next →

⭐ Most Popular

Weather data by Open-Meteo.com (CC BY 4.0) · © OpenStreetMap contributors

As an Amazon Associate, GrowersGuide.ca earns from qualifying purchases. See our affiliate disclosure.