Loading…

Seed Starting with Grow Lights in Canada

Updated November 2026 · Sowing dates and daylight for 22 cities

Seed starting with grow lights in Canada comes down to three settings: hang the light 5–10 cm above the seedlings, run it 14–16 hours a day on a timer, and sow each crop by counting back from your own last frost date. Get those right and the seedlings come out short and sturdy instead of thin and leaning. This page covers each setting and shows, for your city, how little daylight there is on the day you sow.

Quick answer: how to start seeds under a grow light

Use an LED shop light or bar light over each tray, hung on chains so you can raise it. Keep it 5–10 cm above the leaves (higher for a powerful panel, following the maker's seedling height). Put it on a timer for 14–16 hours, with the rest of the day dark. Turn it on the day the first seedlings break the soil. Sow onions about 12 weeks before your last frost, peppers 8, tomatoes 6. On the day onions are sown, Canadian cities get between 8h16 and 12h11 of daylight, through glass and from one side, which is why seedlings on a windowsill stretch.

Ordering seed for the season? West Coast Seeds is a BC company that sells untreated vegetable, herb and flower seed and ships anywhere in Canada. Seed racks thin out by March, so ordering in winter gets you the varieties you planned for.

🥦 Shop vegetable seeds at West Coast Seeds →

Affiliate link — we may earn a commission on qualifying purchases, at no extra cost to you.

Why a Window Is Not Enough in a Canadian Spring

Seedlings are started weeks before the last frost, so in Canada the slow crops are sown in the darkest part of the year. On the date most gardeners sow onions, the day is still short, the sun is low, and a window lets light in from one side only. The seedlings lean toward it and stretch, putting their energy into a long thin stem instead of leaves and roots. A light directly overhead fixes both problems at once: more hours, and light from above. Onions are the longest of the common indoor starts; our guide to growing onions from seed covers them step by step.

The table counts back from each city's frost dates using the same weeks as our seed starting calculator, then works out the daylight on the sowing date from the city's latitude. Onions and peppers count back from the last frost and from the safe planting date respectively, because peppers and tomatoes go out only once frost has passed nine years in ten.

City Sow onions
(daylight)
Sow peppers
(daylight)
Sow tomatoes
(daylight)
Vancouver, BC Jan 1
8h16
Feb 24
10h38
Mar 10
11h29
Victoria, BC Jan 20
8h53
Mar 5
11h12
Mar 19
12h02
Windsor, ON Jan 28
9h49
Mar 14
11h48
Mar 28
12h28
Montréal, QC Feb 4
9h51
Mar 20
12h06
Apr 3
12h50
Toronto, ON Feb 9
10h12
Mar 24
12h18
Apr 7
12h59
Ottawa, ON Feb 12
10h13
Mar 25
12h22
Apr 8
13h06
London, ON Feb 12
10h22
Mar 26
12h23
Apr 9
13h04
Halifax, NS Feb 13
10h19
Mar 31
12h40
Apr 14
13h23
Quebec City, QC Feb 16
10h20
Mar 31
12h43
Apr 14
13h29
Kelowna, BC Feb 21
10h26
Apr 7
13h13
Apr 21
14h04
Fredericton, NB Feb 21
10h39
Apr 5
12h58
Apr 19
13h42
Sudbury, ON Feb 22
10h40
Apr 5
12h59
Apr 19
13h44
Charlottetown, PE Feb 23
10h44
Apr 4
12h55
Apr 18
13h40
Edmonton, AB Feb 27
10h37
Apr 15
13h56
Apr 29
14h53
Saskatoon, SK Feb 27
10h41
Apr 12
13h39
Apr 26
14h33
Winnipeg, MB Mar 1
10h55
Apr 12
13h31
Apr 26
14h21
Calgary, AB Mar 3
11h00
Apr 16
13h50
Apr 30
14h41
Regina, SK Mar 5
11h09
Apr 20
14h02
May 4
14h51
Prince George, BC Mar 7
11h10
Apr 27
14h47
May 11
15h41
St. John's, NL Mar 9
11h28
Apr 21
13h54
May 5
14h37
Thunder Bay, ON Mar 11
11h34
Apr 26
14h14
May 10
14h57
Thompson, MB Mar 21
12h11
May 9
15h49
May 23
16h40

How to read this. Sowing dates come from each city's ECCC frost dates; onions count back 12 weeks from the last frost, peppers 8 and tomatoes 6 weeks from the safe planting date. Daylight is sunrise to sunset on that date, computed from the city's latitude: the most the sky can give, before glass, cloud and buildings take their share. For a city not listed, the seed starting calculator gives every crop's date.

The Setup: One Light per Tray, on Chains

The usual home setup is a wire shelving unit with an LED shop light or bar light hanging above each shelf on chains or adjustable hangers. One 120 cm (4 ft) light covers two standard trays side by side; a 60 cm (2 ft) bar covers one. Being able to raise the light matters more than the brand, because the right height changes every few days as the seedlings grow. To size a light for a whole shelf or rack, the grow light calculator works out how much light an area needs.

LED shop light or bar light — what most home seed starters use

Long, slim and low-heat, so it can sit a few centimetres above the leaves without scorching them. Plain white is fine; seedlings do not need purple light. Look for one that links end to end if you plan to add shelves.

LED panel — if you already own one for a tent

Works, but hangs much higher and usually needs dimming for seedlings. Follow the maker's height chart for the seedling stage. Our guide to grow lights for indoor plants explains how to choose one, and the grow tent light guide covers panels by tent size.

Clip-on lamp — one small pot or a few cells

Fine for a pot of basil or a handful of peppers. Its light falls in a small circle, so a full tray under one ends up with stretched seedlings at the edges.

Recommended
LED Shop Light for Seed Starting

A commonly used setup for seed trays: a linkable LED shop light or bar light, hung on chains. Choose by length (60 cm covers one tray, 120 cm covers two) and check the listing for the hanging hardware and, if given, the manufacturer's PPFD at a stated height. Any plain white LED of that shape will do the job at 5–10 cm.

Browse on Amazon.ca →

Affiliate link — GrowersGuide.ca may earn a commission on qualifying purchases, at no extra cost to you. See our affiliate disclosure.

Recommended
Mars Hydro TS1000 LED Panel (for a Seed Rack)

For a rack with several trays on one shelf rather than a single tray. Per the manufacturer it is a dimmable white LED panel of about 150 W that publishes its light output at stated heights, so you can set it for the seedling range instead of guessing. It hangs much higher than a shop light: follow the maker's seedling height and start dimmed. Too much for one small tray, and the same panel carries tomatoes or lettuce to harvest later.

Check price on Amazon.ca →

Affiliate link — GrowersGuide.ca may earn a commission on qualifying purchases, at no extra cost to you. See our affiliate disclosure.

How Close, How Long, and When to Switch On

Distance. Start an LED shop light or bar light about 5–10 cm above the soil, and raise it to keep that gap as the seedlings grow. Light weakens with the square of the distance, so a light at 20 cm gives roughly a quarter of what it gives at 10 cm. Seedlings do well at about 100–300 µmol/m²/s at leaf level, the seedling range in our PPFD calculator. If the listing gives PPFD at a height, use it; if not, the plants will tell you.

  • Tall, thin, leaning stems: the light is too far away or on too few hours. Lower it.
  • Pale, bleached or crisp leaf tips: too close or too strong. Raise it a few centimetres.
  • Short, stocky, dark green: leave it alone.

Hours. Run the light 14–16 hours a day on a timer, with the rest of the day dark. The long day makes up for a light that is far weaker than the sun. Seedlings need their dark period, so do not leave it on around the clock.

When to switch on. The day the first seedlings break the soil. Seeds need warmth to germinate, not light, but a seedling left in the dark for even a day or two starts to stretch. If a tray has already stretched, see how to fix leggy seedlings.

Leggy Seedlings: Why They Stretch and How to Fix Them

Leggy seedlings, with long thin stems that flop over, are almost always a light problem. University of Minnesota Extension names lack of light as the main cause and puts the light no more than 10 cm (4 in) above the seedlings, with 5 cm (2 in) ideal. Clemson Extension notes that seedlings short of light become weak and topple over when they are a few centimetres tall. Work through the causes in this order:

  1. Lower the light to 5–10 cm above the leaves, and keep raising it only as they grow.
  2. Check the timer. 14–16 hours of light, then darkness. A light that only comes on when you remember is not enough.
  3. Take the tray off the heat mat once most seeds are up. Warm soil under weak light pushes stems up faster than the leaves can feed them.
  4. Keep it cool. A cooler room gives shorter, sturdier seedlings than a warm one.
  5. Add movement. Clemson suggests a small fan near the seedlings once they have two true leaves; brushing a hand across the tops once a day does the same job on a small tray.
  6. Sow later, not earlier. Seedlings kept indoors weeks past their date run out of room and stretch whatever the light. Count back from your frost date with the seed starting calculator.

Stems that have already stretched do not shorten. Fix the cause and the new growth will be compact. Tomatoes are the exception you can rescue: they grow roots along any stem that is buried, so when you pot them up, set them deeper, up to the first set of leaves. Peppers, lettuce and most others should go in at the same depth; for those, a stake or simply growing them on under a better light is the answer.

Light Is for Seedlings; Warmth Is for Seeds

A grow light does little for germination. Peppers and tomatoes sprout fastest with the soil at about 27 °C, which a Canadian basement or spare room in March rarely reaches. A seedling heat mat under the tray closes that gap. Once most seeds are up, move the tray off the mat: warm soil plus weak light is a recipe for stretching. Lettuce, onions and the cabbage family germinate at room temperature and can skip the mat. Our seedling heat mat guide covers thermostat settings, probe placement and running cost.

Recommended
Seedling Heat Mat

A commonly used seedling heat mat, sized to sit under a standard tray. It warms the soil from below, which is what peppers and tomatoes need to sprout in a cool March room. Use it until most seeds are up, then move the tray off it and onto the light.

Check price on Amazon.ca →

Affiliate link — GrowersGuide.ca may earn a commission on qualifying purchases, at no extra cost to you. See our affiliate disclosure.

What It Costs to Run

Less than most people expect, because seedlings are under lights for only six to twelve weeks. Electricity is watts × hours ÷ 1,000 = kWh. A 40 W LED shop light on for 16 hours uses 0.64 kWh a day, or about 19 kWh a month; two lights on a two-shelf stand use twice that. At an example rate of 15 cents per kWh, one light costs under three dollars a month. Rates vary a lot by province, so put your own lights into our grow light electricity calculator for your province's figure.

Common Mistakes

  1. Hanging the light too high. The commonest cause of leggy seedlings. A shop light 30 cm up is giving the tray a fraction of what it gives at 5 cm.
  2. Switching on late. A seedling that comes up in the dark stretches within a day or two.
  3. Sowing by the calendar instead of the frost date. Peppers sown in February in Edmonton are pot-bound and leggy long before it is warm enough to plant them out.
  4. Leaving the tray on the heat mat. Once the seeds are up, the warmth pushes growth the light cannot support.
  5. Skipping hardening off. Seedlings raised under lights have never felt sun or wind. Give them a week or two of gradual time outdoors before planting out; our seed starting guide covers hardening off step by step, and our seedling care guide covers the weeks before it.

Find your own sowing dates

The seed starting calculator gives the indoor sowing date for every crop from your city's frost dates.

Open the seed starting calculator

Frequently Asked Questions

Do you need a grow light to start seeds indoors in Canada?

For anything sown before about mid-April, yes in most of the country. A window gives seedlings light from one side, for too few hours, at a low winter angle, so they stretch toward the glass and come out thin and floppy. A light hung a few centimetres above the tray, on a timer for 14 to 16 hours, is what produces short, sturdy transplants. Crops sown late, such as squash and cucumbers three weeks before planting out, can often manage on a bright south window.

How close should a grow light be to seedlings?

Close. For LED shop lights and the slim bar lights most people use over seed trays, about 5 to 10 cm above the leaves, raised as the seedlings grow. A more powerful LED panel sits higher, often 30 to 45 cm, and the manufacturer's height guide for seedlings is the figure to follow. Light weakens with the square of the distance, so a light at 20 cm gives roughly a quarter of what it gives at 10 cm. Stretching seedlings mean the light is too far away; pale or bleached leaf tips mean it is too close.

How many hours a day should seedlings be under a grow light?

Fourteen to sixteen hours a day, on a timer, with the rest dark. That long day makes up for a light that is weaker than the sun. Running it around the clock does not help: seedlings need a dark period every day.

What kind of grow light is used for seed starting?

Most home seed starters use LED shop lights or LED bar lights, one per standard 25 by 50 cm tray, hung on chains or a shelf so they can be raised. Plain white LEDs work; purple light is not needed. A light that lists its PPFD at a stated height is easier to set up, because seedlings do well at about 100 to 300 µmol/m²/s at leaf level.

When should I start seeds under lights in Canada?

Count back from your own last frost date, not from the calendar. Onions and leeks go in about twelve weeks ahead, peppers eight, tomatoes six, and squash and cucumbers three or four. In Vancouver that puts onions in early winter; in Thompson, in early spring. The table on this page works it out for major Canadian cities, and the seed starting calculator does it for yours.

Do seedlings need a heat mat as well as a grow light?

For warm-season crops, a heat mat speeds up germination: peppers and tomatoes sprout fastest with the soil at about 27 °C, warmer than most Canadian rooms in March. Take the tray off the mat once most seeds are up, and keep the light on from that day. Cool-season crops such as lettuce, onions and cabbage germinate at room temperature and do not need one.

How do I fix leggy seedlings?

Lower the light first: University of Minnesota Extension puts it no more than 10 cm (4 in) above the seedlings, and lack of light is the main cause of long, thin stems. Check the timer gives 14 to 16 hours, take the tray off the heat mat once the seeds are up, and keep the room on the cool side. A small fan or a daily brush of the hand across the tops makes stems sturdier. Stems already stretched do not shorten, but tomatoes can be repotted deeper, up to the first leaves, and grow roots along the buried stem.

How much electricity does a seed starting light use?

Very little. A 40 W LED shop light on for 16 hours a day uses 0.64 kWh a day, about 19 kWh a month. At 15 cents per kWh that is under three dollars a month, for the six to twelve weeks the light is needed. Our electricity calculator works it out with your province's rate.

🌱 More on Starting Seeds and Grow Lights

Was this guide helpful?

Tap or press a star to rate

Save to Pinterest

🌱 Free Newsletter

Get New Guides Before Anyone Else

Planting reminders for your city, new calculators, and Canadian growing guides — free, no spam.

Suggest what we write next →

⭐ Most Popular

Weather data by Open-Meteo.com (CC BY 4.0) · © OpenStreetMap contributors

As an Amazon Associate, GrowersGuide.ca earns from qualifying purchases. See our affiliate disclosure.